10200 Viton® Extrusion
Mosites #10200 is a 75 duometer acid resistant Viton® compound. It has excellent resistance to acids, hot water and stream, chlorinated solvents, aliphatic and aromatic hydrocarbons, petroleum oils, fuels, ozone and weather, lubricants, and animal or vegetable oils. It has a service temperature range oh -10°F to 500°F.
Viton® is not recommended for service in low molecular weight esters and ethers, ketones, certain amines, hot anhydrous hydrofluoric or chlorosulphonic acids and alkyl phosphate esters.
The physical properties shown below were obtained on molded 0.080 inch thick ASTM samples. They are typical of Mosites #10200 but they should not be used to set Quality Control Specification minimum requirements.
Download Safety Data Sheet » Download Technical Data Sheet »| Typical Physical Properties | |
|---|---|
| Hardness (shore A) | 75 |
| Tensile Strength (psi) | 1708 |
| Elongation at Break (%) | 352% |
| Modulus at 100% Elongation (psi) | 512 |
| Tear Strength (ppi) | 153 |
| Specific Gravity | 1.90 |
| Compression Set % (22 Hours at 350° F) | 60% |
75 Durometer Ground Finish
| Cross Sectional Size | |
|---|---|
| Inches | |
| 3/8" X 3/8" | |
| 3/8" X 1/2" | |
| 3/8" X 5/8" | |
| 3/8" X 3/4" | |
| 3/8" X 1" | |
| 7/16" X 7/8" | |
| 7/16" X 1" | |
| 1/2" X 1/2" | |
| 1/2" X 9/16" | |
| 1/2" X 5/8" | |
| 1/2" X 3/4" | |
| 1/2" X 1" | |
| 9/16" X 9/16" | |
| 9/16" X 5/8" | |
| 5/8" X 5/8" | |
| 5/8" X 3/4" | |
| 5/8" X 7/8" | |
| 5/8" X 1" | |
SPECIFICATIONS:
- Viton® B
Price Breaks:
- 1-49 Ft.
- 50-149 Ft.
- 150-499 Ft.
- 500 Ft. & Over
Notes:
- Color: Black
- Tolerance: All sizes + .025″-.000″
- Viton® is a registered trade mark of The Chemours Company
- Available in limited supply. Minimum purchase may apply
