14125 and 14126 Silicone Light Fabric Impression Finish

Mosites #14125 and #14126 Gray compounds are 50 and 60 durometer, respectively, commercial grade silicone rubber sheets with light fabric impression finish. The formulations meet the requirements of MilR-5847Dand ZZR-765-C, Class IIA an IIB; AMS 3302 and AMS 3303. The compounds have excellent resistance to weathering and ozone, good resistance to hot water and low pressure steam, alcohols, diethylene glycols and fair resistance to petroleum base oils. The service temperature range is from –80 deg. F to 450 deg. F.

Silicone polymer is not recommended for service in aromatic solvents, fuels, chlorinated solvents and acids.

The physical properties shown below were obtained on molded 0.080 inch thick ASTM samples. They are typical of Mosites #14125 Gray and #14126 Gray but they should not be used to set Quality Control Specification minimum requirements.

Download Safety Data Sheet (#14125) » Download Safety Data Sheet (#14126) »
Download Technical Data Sheet »
Typical Physical Properties
#14125 #14126
Hardness (shore A) 50 60
Tensile Strength (psi) 1005 1013
Elongation at Break (%) 377% 286%
 Modulus at 100% Elongation (psi) 218 326
Tear Strength (ppi) 62 64
Specific Gravity 1.16 1.21
Compression Set (%) (70 Hours at 302° F) 8% 21%

Price Breaks Per Square Yard

36" Wide Continuous Length Rolls – Untrimmed

Thickness
Inches Millimeters
1/32 0.794
1/16 1.588
3/32 2.381
1/8 3.175
3/16 4.763
1/4 6.350

Price Breaks (Sq. Yds.)

  • 1-4
  • 5-9
  • 10 & Over

Price Breaks Per Linear Yard

48" Wide Continuous Length Rolls – Untrimmed

Thickness
Inches Millimeters
1/16 1.588
1/8 3.175
3/16 4.763
1/4 6.350

Price Breaks (Sq. Yds.)

  • 1-4
  • 5-9
  • 10 & Over

Notes:

  • 40 and 70 durometer, other thickness and widths, other colors and food grade compounds are available on request.