1055 Viton® Sheet

Mosites #1055 is a 70 durometer brown non-specification Viton® compound. It has excellent resistance to aliphatic and aromatic hydrocarbons, petroleum oils, fuels, ozone and weather, lubricants, and animal or vegetable oils. It has a service temperature range of –10 degrees F to 400 deg. F

Mosites #1055 is not recommended for service in acids, chlorinated solvents, or hot water and steam. Mosites has other Fluoroelastomer compounds that are recommended for these applications.

Fluoroelastomer is not recommended for service in low molecular weight esters and ethers, ketones, certain amines, hot anhydrous hydrofluoric or chlorosulphonic acids and alkyl phosphate esters.

The physical properties shown below were obtained on molded 0.080 inch thick ASTM samples. They are typical of Mosites #1055 but they should not be used to set Quality Control Specification minimum requirements.

Download Safety Data Sheet » Download Technical Data Sheet »
Typical Physical Properties
Hardness (shore A) 72
Tensile Strength (psi) 1041
Elongation at Break (%) 232%
Modulus at 100% Elongation (psi) 735
Tear Strength (ppi) 135
Specific Gravity 1.99
Compression Set % (22 Hours at 350° F) 41%

70 Durometer Light Fabric Impression Finish

SPECIFICATIONS:
Commercial Grade Viton® A

36" Wide Continuous Length Rolls – untrimmed

Thickness
Inches Millimeters
1/32" 0.794
1/16" 1.588
1/8" 3.175
3/16" 4.763
1/4" 6.350

Price Breaks:

  • 1-4 Sq. Yds.
  • 5-9 Sq. Yds.
  • 10 Sq. Yds. & Over

48" Wide Continuous Length Rolls – untrimmed

Thickness
Inches Millimeters
1/16" 1.588
1/8" 3.175
3/16" 4.763
1/4" 6.350

Price Breaks:

  • 1-4 Lin. Yds.
  • 5-9 Lin. Yds.
  • 10 Lin. Yds. & Over

Notes:

  • Color: Brown
  • Viton® is a registered trademark of Dupont Performance Elastomers