10116 Viton® Sheet
Mosites #10116 is a 75 durometer low compression set premium grade Viton® compound. It has excellent resistance to aliphatic and aromatic hydrocarbons, petroleum oils, fuels, ozone and weather, lubricants, and animal or vegetable oils. It has a service temperature range of –10 degrees F to 400 deg. F.
Mosites #10116 is not recommended for service in acids or hot water and steam. Mosites has other Viton® compounds that are recommended for these applications.
Viton® is not recommended for service in low molecular weight esters and ethers, ketones, certain amines, hot anhydrous hydrofluoric or chlorosulphonic acids and alkyl phosphate esters.
The physical properties shown below were obtained on molded 0.080 inch thick ASTM samples. They are typical of Mosites #10116 but they should not be used to set Quality Control Specification minimum requirements.Download Safety Data Sheet » Download Technical Data Sheet »
|Typical Physical Properties|
|Hardness (shore A)||75|
|Tensile Strength (psi)||1700|
|Elongation at Break (%)||180%|
|Modulus at 100% Elongation (psi)||1000|
|Tear Strength (ppi)||185|
|Compression Set % (22 Hours at 350° F)||7%|
75 Durometer Light Fabric Impression Finish
- Premium Grade
- Viton® A
- E-60-C Polymer
- Dupont Gasket Code S-22
- 1-9 Sq. Yds.
- 10 Sq. Yds. & Over
- Color: Black
- Viton® is a registered trademark of Dupont Performance Elastomers
- Available in limited supply only. Minimum purchase may be required.